Pearlized Body Wash

By: TOM BRANNA

Editor

Ingredients

%

Phase A

Water
51.098

Carbopol Aqua SF-2 (Acrylates crosspolymer-4)
5.000

Phase B

Iselux SFS (Innospeic) (Water and sodium lauroyl methyl isethinate (and cocoamidopropyl betain (and) sodium cocoyl isethionate (and) sodium methyl oleoyl taurate)
29.000

Sodium cocoyl glycinate
0.856

Phase C

Sodium hydroxide solution (25%)
0.856

Phase D

Natriquest E-30 (Innospec) (Trisodsium ethylenediamine disuccinate)
0.500

Emulsil DME-504 (Innospec/Chemsil) (Dimethicone (and) laurteh 4 (and) laureth 23)
2.000

Phase E

Miracare BET-C30 (Cocamidopropyl betaine)
5.000

Phase F

Water
2.000

Syncrystal Silk Silver (Synthetic fluorophlogopite (and) titanium dioxide (and) tin oxide)
0.1000

Phase G

Euxyl K 100 (Methylchloroisothiazolinone (and) methylisothiazolinone (and) benzyl alcohol)
0.400

Phase H

PO#AH174191 (White Mandarin and mangosteen)
1.000

Phase I

Citric acid (50%)
0.706

Procedure

Charge water (A) into the main vessel. With moderate mixing, slowly add the Carbopol Aqua SF-2 (A). Slowly add the Iselux SFS (B) to the batch. Mix until completely uniform. Next, add sodium cocoyl glycnate to the batch. Adjust the pH with sodium hydroxide solution (25%) to 6.50-7.00. Add the Natrlquest E30 (D) and Emulsil DME-504 to the batch one at a time with continuous slow mixing to avoid aeration. Add Miracare BET C-30 to the batch. In a separate vessel, pre-mix water (F) and Syncrystral Silk Silver (F) until the pearl is completely wet. Add phase F to the batch. Add Euxyl K100 (G). Add fragrane (H) to the batch. Adjust the pH of the batch to 5.50-6.00.

Properties

Appearance—shiny white pearlized with citrus fragrance; pH—6.00; Viscosiy, cps (Brookfield RV #5 @ 12 rpm, 25°C)—8600; % Solids—18.48; Stability—8 weeks at room temperature, 45°C, and 3 cycles of freeze/thaw.